Hydrofoil Boards
Our windsurfing boards are handmade with the highest technological requirements and high standard of workmanship. Continuous improvement of their production methods allows us to obtain durable boards with very good results. The boards are produced in Sandwich technology in various material configurations. From the combination of glass and carbon or carbon-aramid (Kevlar) to carbon and carbon-aramid joints and all-carbon with elements reinforced with Dyneema material. In the production of windsurfing equipment we use the best, modern materials available on the European market, such as: Biaxial Carbon, Aramid-Carbon, Dyneema or resins with aviation certification used for production of composites in aviation.
Formula Pentastar
This generation of racing machine is a combination of shapes that enable quick sliding out at low wind thresholds. It has a thin and wide bow. The board sails very fast against and with the wind, in a wide range of the weakest conditions. Full control over the board is maintained while sailing thanks to the flat stern section and Thunder Tail cut-out. With good technique, it can generate enough power to achieve slip even at low speed, as well as keep it at the wind gaps. This windsurfing board reaches high speed on both sharp and full courses. It is easy to navigate thanks to its high buoyancy and double concavas at the bottom, allowing for a soft sailing through the waves. Formula is also available in a version adapted to Hydrofil.
Board price in basic version - Full Carbon technology - 2070 €
Bottom: The board has two concavas for better hydrodynamic passage through the waves and better stability. They move to the flat sliding section of the stern bottom for better acceleration and higher final speed. The fin box is rearranged from the end of stern to 8 cm. This distance increases the sliding surface behind the fin and reduces the resulting water turbulence. This shape of the stern bottom along with appropriately shaped cut-outs enables the water to be pulled off without additional disturbance. The sliding surface of this board is larger than that of other boards in the formula.
Deck: The lowered deck at the rear of board – from the front pads – provides greater sail performance when fully closed. Embossing at the rear of deck not only allows for comfortable use of the internal footstraps, but also strengthens this part of deck. On the rail sides in the sliding section are buffers that reduce splashing and flooding of the deck from under the board during sliding, they further reduce water resistance.
Hull: Parallel long sides and wide bow provide better buoyancy and easier turns on windward and leeward. Three external footstrap settings – front and stern. Footstraps at the board’s axis – at the stern – are angled for an ergonomic foot position. High, vertical sides in the area of pads allow comfortable support of the feet in maximum external position. To avoid the effect of water “hooking” when turning through the sharp board edges, they are bent from the front pads to the bow.
Construction: Perfectly stiffened board. Carbon box for Super Deep Tuttle or Deep Tuttle fin. Recommended fin 65-70 cm.
Board price in basic version - Full Carbon technology - 1 980 €
Nagar Lightwind
Wide windsurfing board with formula features. It proves that windsurfing can be fascinating even in low winds. It pushes the board’s performance limit in light wind conditions. The board is designed to carry large sails (8 – 11 m²). It has two concavas, a flat sliding section and a Toro-type stern with long external bumpers, which are excellent for releasing water on the sides. The sides in stern section are profiled higher than the deck for better closing the sail and comfortable foot position. The board has three internal and external footstrap settings. Quick sliding out, comfortable handling and speed in light wind have never been easier.
Element windsurfing boards are characterized by high quality workmanship, bold shapes, graphics and unique nature. Our offer includes high-performance windsurfing boards, handmade in Poland with the possibility of customization to individual order. Element boards are made in Sandwich technology with appropriate reinforcement in places particularly exposed to loads and impacts, which ensures their durability and resistance to other types of windsurfing. Waiting time for the completion of ordered board – up to eight weeks. Due to the need to wait for the board, the best time to place an order is from September to April in order to enjoy the whole season. We also provide service support services, professional removal of all damages including restoration, graphics, color, etc.
Basic Customization:
- possibility to adjust the color of pads (black/white) – included in the price,
- possibility to add an inscription on board (up to 15 characters) – for an additional fee of 35 €,
- possibility of additional strengthening the bow and back of deck – for an additional fee of 50 €,
- possibility to make a board with an additional Kevlar layer (Carbon - Kevlar technology) – for an additional fee of 85 €,
- possibility to increase the board’s buoyancy to any capacity by only increasing its thickness – for an additional fee of 105 €,
possibility to order a dedicated cover for the board – for an extra charge from EURO 95
Making the bow protector in color and possible graphic design EURO 135
Board price in basic version - Full Carbon technology - 1840 €
New Edge - Freeslalom
This is a windsurfing board for intermediate and advanced sailors. It has a low bow. The buoyancy is evenly balanced. The maximum width is slightly shifted forward. It has a shallow, transverse cut-outs. Four external footstrap settings. Long slip surface provides good wave covering. Weight of carbon board - 7,7kg.
Board price in basic version - Full Carbon technology - 1910 €
Nagar - Race - Slalom
This windsurfing board, which due to its capacity and width, has the characteristics of a race-slalom board: fast sliding out in all conditions, bottom adapted to high speeds, stern with cut-outs releasing the board even in low wind conditions. Easy to swim and maintain control. Three internal and external footstrap settings.
Board price in basic version - Full Carbon technology - 1860 €
Dagger - Ride
A windsurfing board designed for people starting to slide and for those who appreciate comfortable sliding recreational swimming. The board’s bow is wide, quite highly curved – for every waving of the basin. Increased buoyancy at the board’s stern. The buoyancy at the bow allows for returns through the headstay. The board’s width is slightly shifted forward. Three external footstrap settings. The board’s deck at the back is ergonomically profiled for a very comfortable foot position.
Board price in basic version - Full Carbon technology - 1910 €
Fourth Generation - Slalom
Wide, high-performance windsurfing board in three capacities to choose from. A distinctly wide bow and narrow stern result in fast slide-out, high acceleration and high final speed. Board with a low bow, requiring more skill. Four external footstrap settings. A board for carrying large sails.
Board price in basic version - Full Carbon technology - 1910 €
Revolt - Freeslalom
It’s a futuristic, universal windsurfing slalom board. The edges and sides of stern are bent at the widest point of the board’s bottom for maximum manoeuvrability. Moving the widest point of this board forward enables to pull it out of the water quickly. Three external footstrap settings.
Board price in basic version - Full Carbon or Carbon - Kevlar technology - 1840 €
Spire - Freewave
A high-performance windsurfing board for many purposes. This board is perfect for both straight and jumping surfing, as well as for long courses on small and bigger waves, tricks and freestyle. This short board is ideal for drifting and thus good control in the air and confident wave surfing. A board with great manoeuvrability potential. The sides of this board are rounded up to the bow, stern with or without a spoiler. In order not to lose manoeuvrability, the spoiler replaces the Duck Tail stern, but it does not shorten the board’s bottom and partially prevents the stern from sticking into the water. It has a properly reinforced deck for additional loads. Four options for external and extremely internal footstraps – front, external stern with additional centre position. A version with a small V at the stern is also available. 4 mm stern deflection.
Board price in basic version - Full Carbon technology - 1980 €
Invader - Hydrofoil board
Carbon, wide windsurfing board adapted and reinforced for swimming with hydrofoil. It has two concavas at the bottom and shallow Thunder Tail cut-outs. The board can also be a light air board with fin. Three external and internal footstraps settings for hydrofoil and fin, as well as individual stern inserts at the board’s axis.
Stealth Formula - Race Hydrofoil boad
These are high-performance Formula Foil boards with large capacities. Short with large sections and a maximum width of up to 100 cm. Specially adapted bottom and bow of the board for fast take-off. The large stern displacement, and Cut Outs larger and deeper reduce the soaked area of the board, providing maximum acceleration on take-off. The board’s large outline area, and bow-V shape improve dynamics and give better control of the board. It also improves the board’s slide in contact with the water, peeling off from the water and flying on the Foil.
Board price in basic version - Full Carbon technology 91cm - 2070 €, 95cm, 100cm -2140 E
Board price in basic version - Full Carbon technology 91cm - 2025 €, 100cm -2070 E
Invader SLX - Hydrofoil board
These are cruising Formula Foil boards. Short with large sections and maximum width up to 100 cm. The volumes are larger than Formula allowing the boards to take-off better. Cutouts larger than other boards, reducing the soaked area of the board, providing additional acceleration in pulling the stern away from the water. They have a quite high cambered bow, a large board area in the outline,and bow-V shape, improving dynamics and providing better control, also in higher winds. Thus, they improve the launch, and aerodynamic flight of the Foil board
Board price in basic version - Full Carbon technology - 1980 €
Invader SL - Hydrofoil board
These are carbon, wide and lightweight windsurfing boards for advanced users. Available in four capacities. Adapted and reinforced for swimming with hydrofoil. The board has straight, parallel sides, a wide bow and a wide stern allowing the board to be pulled out of the water faster. It has two concavas at the bottom and shallow, properly profiled Thunder Tail cut-outs. Three footstrap settings: external and internal, as well as additional internal at the stern, at the board’s axis.
Board price in basic version - Full Carbon technology - 1980 €
Vision - Slalom
Wide, high-performance windsurfing board, for advanced users. Bow low bent. The width of this board is clearly set forward, allowing quick sliding out. Bottom with cut-outs. Four external footstrap settings – everyone will find a comfortable position.
* Woda w tle: freestockcenter (pl.freepik.com, https://pl.freepik.com/darmowe-zdjecie-wektory/woda)
1. Choose a windsurfing board model.
2. Select customization
(optional).
3. Contact us by phone, Messenger or e-mail, we will arrange all the details.
4. Make a prepayment.
5. Arm yourself with patience. Waiting for a board takes up to eigth weeks, during witch time you will receive photos of the board prepared for you.
6. After you have paid the full amount, your windsurfng board will be on its way to you.
7. Take full advantage of our boards.
address:
e-mail:
phone:
96-100 Skierniewice
ul. Zagajnikowa 16
Poland
Element Windsurfing Boards
foto - Steven Le Gallic, rider - Vincent Gautier, board - Vision 120l
All rights reserved © Element